• Davis Standard 1.25″ / 1.50″ / 1.75″ 24:1 Satellite Extruders.
-Less Extruder Riser Frame to Raise Center Line to Customers Specified Height to Match Downstream Equipment.
(See Option 2 Below)
-APM Inventory # 2MONE
Dates of Manufacture:
-Quantity Of 2 2006 / 1.50″ / 15 HP Drive
-Quantity Of 1 2006 / 1.75″ / 20 HP Drive
-Quantity Of 3 2008 / 1.50″ / 15 HP Drive
-Quantity Of 4 2009 / 1.25″ / 7.5 HP Drive
-Quantity Of 2 2009 / 1.50″ / 15 HP Drive
-Quantity Of 3 2010 / 1.50″ / 15 HP Drive
-Davis Standard Model HPE With the Following Drive Motors
7.5 HP Drive / 1750 RPM
15 HP Drive / 1750 RPM
20 HP Drive / 1750 RPM
-AC Drive Control for Each Machine (See Option 3 Below).
-Gear Box Ratio: 17:1
-Max. Screw Speed: 100 RPM
-General Purpose Screw
Note: Standard feed screws supplied with the HPE machines are single-stage mixing type chrome-plated feed screws.
-Water Cooled Feed Section
For feeding efficiency, the feed throat is angled back 30 degrees from perpendicular with the feed screw bore.
-Stainless Steel Feed Hopper With Maguire Clear-Vu Vacuum Loader And Hopper Cover.
-Cast Aluminum Barrel Heaters
Air Cooled Barrel
Three Barrel Zones On 1.25″
Four Barrel Zones On 1.50″ & 1.75″
Voltage: 230 / 3 / 60
-A standard four-bolt flange is provided for connection to die adapter.
-Manual Screen Changer on each Extruder
-Control Panel for Each Machine (See Option 1 Below)
Temperature controllers are provided for each control zone.
Standard scale is 0-600F.
-Die zone power and thermocouples plug directly into the cabinet.
The standard drive consists of digital feed screw RPM and Motor Load Meters.
-Start and Stop pushbuttons, a speed potentiometer, and drive fault pilot light.
Pricing And Options Details
Extruders Sold at Base Price Plus Options of Customers Choice
-Base Price: $15,000.00 For Each Machine, FOB Georgia
(1)- New Control Panel
Up to Four Barrel Zones
Two Die Zones
(2)- New Riser Frame with Side Panels
Frame to Be Constructed with A Center Line Height Per Buyers Specifications.
(3)- New AC Inverter Drive Motor Control Panels:
-New 7.5 H.P. Drive with set up $1,430.00
-New 15 H.P. Drive with set up $1,750.0
-New 20 H.P. Drive with set up $2,050.00
(4)-Total Labor to Install All of the Above Options on Each Machine Purchased. $6,500.00